|
| 150-015 |
|
Recoil Flange Bolt
Flange Bolt for starter rewinds. Fits Honda models: GX120, GX160, GX240, GX270 & GX390K1. Size: 6mm X 10mm. Fits our 150-452, 150-460, 150-469 etc. (Priced Individually - Sold in packs of 3). |
 |
| 150-454 |
|
SEE OUR 150-409
CROSSES TO OUR 150-409 |
|
| 150-150 |
|
Starter Cup
Starter Cup - Fits Honda model: GX120 series engines with metal starter dogs. (Fits our 150-479 starter rewind) (While Quantities Last) |
|
| 150-152 |
|
Starter Cup
Starter Cup - Fits Honda model: GX160 series engines. Measure: 3-1/16" Flange OD X 2-9/16" across the flats X 1-7/16" overall height.(While Quantities Last) |
|
| 150-154 |
|
Starter Cup
Starter Cup - Fits Honda models: GX240 and GX270
series engines. Measure: 2-5/8" OD X 2-9/16" overall height. (While Quantities Last). |
|
| 150-082 |
|
Starter Pawl
Starter Pawl only - Fits Honda model: GX110, 120, 140, 160 etc. (While Quantities Last). NOTE: Also see our 150-080 starter pawl repair kit. |
|
| 150-080 |
|
Starter Pawl Repair Kit
Starter Pawl Repair Kit - Newer style rewinds. Replaces Honda 28422-ZH8-013 (ratchet) 28443-ZH8-003 (spring) 28441-ZH8-003 (washer) 28433-ZH8-003 (guide ratchet). Fits models GX110, GX120, GX140 and GX160 series. (Fits our 150-452 Rewind Assembly) |
|
| 150-071 |
|
Starter Pawl Repair Kit
Starter Pawl Repair Kit. Newer style rewinds. Fits Honda engine models: GX120, GX160K1 and some GX200 series - that use the rounded steel cogs. (Fits our 150-479 starter rewind assembly). |
|
| 150-108 |
|
Starter Pawl Repair Kit
Starter Pawl Repair Kit - Newer style rewinds. Fits Honda models: GCV135 and GCV160. (Fits our 150-466 Rewind Assembly) |
|
| 150-070 |
|
Starter Pawl Repair Kit
Starter Pawl Repair Kit - Newer style rewinds. Fits Honda models: GX240, GX270, GX340 and GX390. (Fits our 150-450, 150-460 and 150-469 Rewind Assemblies). |
|
| 150-072 |
|
Starter Pawl Repair Kit
Starter Pawl Repair Kit - Older style rewinds. Fits Honda models: GX340 and GX390. (Fits our 150-459 Rewind Assembly) |
|
| 150-158 |
|
Starter Pulley
Starter Rewind Pulley - Fits Honda models GX110, GX120, GX140, GX160 and some GX200 series. > (2) Cog style, Plastic cogs; > Pulley OD: 5-3/8". (Fits our 150-452 starter rewind assembly) |
|
| 150-167 |
|
Starter Pulley
Starter Rewind Pulley - Newer Style. Fits Honda models: GX240 and GX270. For 8 and 9 Hp engines. > (2) Cog style, Steel cogs; > Pulley OD: 5-13/16". (Fits our 150-469 starter rewind assembly). |
|
| 150-168 |
|
Starter Pulley
Starter Rewind Pulley - Newer Style. Fits Honda models: GX340 and GX390. For 11 and 13 Hp engines. > (2) Cog style, Steel cogs; > Pulley OD: 6-5/8". (Fits our 150-460 starter rewind assembly). |
|
| 150-157 |
|
Starter Pulley with Cup (FINAL SALE)
Starter Rewind Pulley with metal cup. Fits Honda models: GX120, GX160 and GX200 series. For 4, 5.5 and 6.5 HP engines. Found on several HONDA engines. > (2) Cog style, Steel cogs; > Pulley OD: 5-3/8". (Fits our 150-450 and 150-470 starter rewind assemblies). (While Quantities Last) |
|
| 150-159 |
|
Starter Pulley with Spring
Fits Honda models: GX120, GX160K1 and GX200 series engines that use the rounded steel cogs. Measures: 5-3/8" OD, (2) cog style - plastic cogs. Includes our 155-9527 spring. (Fits our 150-479 starter rewind assembly). |
|
| 150-160 |
|
Starter Pulley with spring
Starter Rewind Pulley with spring. Fits Honda models: GCV135 and GCV160 series engines. > (2) Cog style, Plastic cogs. > Pulley OD: 5-1/8". Includes starter spring. (Fits our 150-466 starter assembly). |
|
| 150-164 |
|
Starter Pulley with Spring
Starter Rewind Pulley with Spring. Fits Honda models: GXV140 and GXV160. (Includes our 155-9505 spring). Pulley OD: 4-11/16" |
|
| 150-089 |
|
Starter Ratchet
Starter Ratchet - Fits Honda models GXV160 series
engines. (While Quantities Last). |
|
| 150-083 |
|
Starter Ratchet
Starter Ratchet - Fits Honda models: GX240, GX270,
GX340 and GX390 series engines. (While Quantities Last) |
|
| 150-090 |
|
Starter Ratchet Return Spring
Starter Ratchet Return Spring - Fits Honda model: GXV160 series engines. (While Quantities Last) |
|
| 150-086 |
|
Starter Ratchet Return Spring
Starter Ratchet Return Spring - Fits Honda model: GXV120 series engines. (While Quantities Last) |
|
| 150-087 |
|
Starter Ratchet Return Spring
Starter Ratchet Return Spring - Fits Honda models: GX240, GX270, GX340 and GX390 series. (While Quantities Last) |
|
| 150-088 |
|
Starter Ratchet Return Spring
Starter Ratchet Return Spring - Fits Honda model: GX160 series engines. (While Quantities Last) |
|
| 150-409 |
|
Starter Rewind Assembly
Starter Rewind Assembly - Fits Honda models: Fits GXV120, GXV140, HR194, HR195, HR214, HR215, HRA214, HRA215, HRC215, HR2150, HR1950. This assembly has (3) 1/4" diameter mounting holes on 5-1/2" centres. Pulley diameter: 4-13/16". Painted red. > (1) plastic starter ratchet ("U" shaped), replaces Honda# 28422-896-010). NOTE: Also see our new style starter rewind assemblies part# 150-455 also with (3) mounting bolts BUT with (2) metal starter dogs. Replaces our 150-454 starter rewind assembly |
|
| 150-452 |
|
Starter Rewind Assembly
Starter Rewind Assembly - NEW STYLE. Fits Honda models: GX110, GX120, GX140, GX160 and GX200 series. Painted red. This assembly has (6) mounting holes. > (2) cog style; > plastic cogs. (Uses our 150-080 starter pawl kit & our 150-158 starter pulley). Also see our 150-450 rewind with steel cogs. |
|
| 150-459 |
|
Starter Rewind Assembly
Starter Rewind Assembly - OLD STYLE. Fits Honda model GX340. For 11 Hp Honda engines. (11) mounting holes. > (1) cog style; > steel cog. Measures: 8-3/8" OD (Base), Mounting holes "center to center" straight across the middle: 7-7/8", Mounting holes "center to center" clockwise: 2". (Uses our 150-072 starter pawl kit). |
|
| 150-460 |
|
Starter Rewind Assembly
Starter Rewind Assembly - NEW STYLE. Fits Honda models: GX340, GX390, GX610 and GX620. For 11, 13, 18 and 20 Hp engines. (6) mounting holes. > (2) cog style; > steel cogs. Measures: 8-3/8" OD (Base), Mounting holes "center to center" straight across the middle: 7-7/8", Mounting holes "center to center" clockwise: 3-15/16". (Uses our 150-070 starter pawl kit & our 150-168 starter pulley). |
|
| 150-458 |
|
Starter Rewind Assembly
Starter Rewind Assembly. Fits most HONDA model: GX100. For 2.8 Hp OHV Honda engines. (6) mounting holes with normally only (3) used. Center to Center between mounting holes = 67mm. Measures: 5-3/4" OD. > (2) cog style; > plastic cogs. NOTE 1: May be painted BLACK or RED. NOTE 2: Verify OEM part number by referring to engine model and spec - does not fit all applications. |
|
| 150-480 |
|
Starter Rewind Assembly
For Honda models: GCV135, GCV160 and GCV190 - Without top cover. (S1A1 Only) |
|
| 150-477 |
|
Starter Rewind Assembly
For Honda model: GXV160 engines after serial number 1275952. (3) mounting bolts on 5-1/2" centres, (2) cog style, ROUND steel cogs, painted red with 55" rope. (Uses our 150-071 starter pawl repair kit). |
|
| 150-402 |
|
Starter Rewind Assembly
Starter Rewind Assembly - Fits Honda models: GX22/3, 1B/C, 22cc and GX31 (31cc), also fits Komatsu Zenoah models: G34 and 160. (4) 3/16" mounting holes on 3-3/8" centers. > (1) spring steel cog |
|
| 150-466 |
|
Starter Rewind Assembly
Starter Rewind Assembly - NEW STYLE. Colour: BLACK or RED. Fits 4 thru 5.5 Hp engines. For Honda models: GC135, GC160, GCV135 and GCV160 series engines; also found on EN2000 generators. NOTE: Verify: OEM part number by referring to your engine model and spec - Does NOT fit all applications. (3) mounting holes on 6-5/8" centers. > (2) cog style, plastic cogs. (Uses our 150-108 starter pawl kit, 150-160 starter pulley w/ starter spring or our 155-9527 starter spring only). |
|
| 150-400 |
|
Starter Rewind Assembly
Starter Rewind Assembly - NEW STYLE. Fits Honda models: GXV140 and GXV160 series engines; also found on MTD models: 1P61P0, 1P65FU, 1P65FUA, 1P70FU and 1P70FUA. . > (2) cog style; > steel cogs. (3) mounting holes on 6-11/16" Centres approximately. Pulley OD: 4-3/4"; (2) flat metal starter dogs. Overall Height: 1-7/16". NOTE: Mounting holes may need to be enlarged in some applications. |
|
| 150-576 |
|
Starter Rewind Assembly
Starter Rewind Assembly for Honda. Fits Honda GX25 engine, FG110 Rototiller, HHT25S Trimmer and WX10 Pump. (While Quantities Last). |
|
| 150-455 |
|
Starter Rewind Assembly
Starter Rewind Assembly - Fits Honda models: GXV120, GXV140, HR194, HR215, HRA215, HRC215, HR2150, HR1950. This assembly has (3) mounting holes on 5-1/2" centres. > (2) metal starter pawls. NOTE: Also see our 150-409 rewind assembly also with (3) mounting holes BUT (1) plastic starter pawl (U-shaped). |
|
| 150-063 |
|
Starter Rewind Assembly (GREAT PRICE)
Starter Rewind Assembly - OLD STYLE. Fits Honda models: G-150 and G-200 series and GX110, GX140, GX160 OLD STYLE with (1) metal dog. Painted red. This assembly has (11) mounting holes. > (1) cog style; > steel cog. Pulley diameter: 5-1/4. Measures: 2" overall height X 6-7/8" base OD. |
|
| 150-479 |
|
Starter Rewind Assembly (GREAT PRICE)
NEWEST STYLE. For Honda models: GX120, GX160K1 and GX200 series engines that use the rounded steel cogs. (6) mounting bolts, (2) cog style, ROUND steel cogs, painted red. (Uses our 150-071 starter pawl repair kit & our 150-150 starter cup & our 150-159 starter pulley). NOTE: Verify: OEM part number by referring to your engine model and spec number. Does NOT fit all applications. ALSO SEE OUR 150-450 |
|
| 150-469 |
|
Starter Rewind Assembly (GREAT PRICE)
Starter Rewind Assembly - Fits Honda models: GX240 and GX270 and K1 series engines. For 8 and 9 Hp Honda engines. (6) mounting holes) > (2) cog style; > steel cogs. Measures: 7-5/8" OD (Base), Mounting holes "center to center" straight across the middle: 7-1/8", Mounting holes "center to center" clockwise: 3-9/16". (Uses our 150-070 starter pawl kit & our 150-167 starter pulley). |
|
| 150-450 |
|
Starter Rewind Assembly (GREAT PRICE)
Starter Rewind Assembly. Fits Honda models: GX120, GX160 and GX200 series. For 4, 5.5 and 6.5 HP engines. Found on many HONDA applications. NOTE: Requires installation of "included" starter cup. Painted red. This assembly has (6) 1/4" diameter mounting holes. > (2) cog style; > metal cogs. (Uses our 150-070 starter pawl kit). Also see our 150-452 rewind with plastic cogs or our 150-450 with metal cogs and starter cup. NOTE: Verify: OEM part number by referring to your engine model and spec - Does NOT fit all applications. |
|
